SG33BL-CAN-24V (Circular Non C
33mm, Waterproof, Brushless, High Torque Actuator with Circular Connector (24V)
Part #: 40332C
Weight: 1.00 lbs / 0.4535 kg
$0.00
Maximum of 20 units per part # are available for purchase on our website.
Contact Sales directly to discuss purchases over 20 units:
Actuator Sales
Seth Cohen
seth.cohen@hiteccs.com
(858) 737-9220 x311
General Sales
sales@hiteccs.com
| Performance Specifications | |
|---|---|
| Command Protocol |
CAN DroneCAN / UAVCAN v0.0 |
| Operating Voltage (V) |
Min: 18.00
Max: 32.00 |
| Weight (g) | Min: 1.00 |
| Stall Torque (kgf•cm / oz•in) |
Min: 147.0 / 2039.22 @ 12V
Max: 147.0 / 2039.22 @ 12V |
| No Load Speed (sec/60°) |
Min: 0.185 @ 12V
Max: 0.185 @ 12V |
| Running Current (mA) |
Min: 500 @ 12V
Max: 500 @ 12V |
| Stall Current (mA) |
Min: 10000 @ 12V
Max: 10000 @ 12V |
| Circuit |
Digital |
| Rotation |
Programmable |
| Operating Voltage (V) |
Min: 18.00
Max: 32.00 |
| Torque Range |
Min (KG/CM): 147.00
Max (N/CM): 1441.20 |
| Max Speed (SEC/60) | 0.19 |
| Physical Specifications | |
|---|---|
| Case Size (mm) | 33.00 |
| Dimensions (mm) | 64.0 x 33.0 x 90.0 |
| Weight (g) | 1.00 |
| Motor Type | BLDC |
| Potentiometer |
Magnetic Encoder |
| Gear Material | 1MPM & 3 Hardend Steel |
| Horn Gear Spline | Square 6.5 x 6.5 |
| Case Material | Rugged Aluminum Alloy |
| IP Rating |
IP68 |
Contact Sales directly for accessories and/or replacement parts:
• Case Set
• Gear Set
• Horn Set
Actuator Sales
sales@hiteccs.com
(858) 737-9220 x311
• End Point Adjustments
• Direction
• Fail Safe
• Dead Band
• Speed (Slower)
• Soft Start Rate
• Overload Protection
• Data Save / Load
• Program Reset
| DroneCAN / UAVCAN v0.0 Command Protocol | Download |
|---|---|
| Wiki | |
|
Command Protocol Support |
More Information |
| Manual | |
|
CAN(2.0A, 2.0B) & DroneCAN / UAVCAN v0.0 Servo Actuator Control Protocol Manual (Updated: 02/14/22) |
More Information |
| Library | |
|
Hitec CAN Servo Register Header (hitec-can-servo-reg-public.h) |
Download Now |
| Configuration App | |
| Download the following app to configure your actuator: CAN(2.0A, 2.0B) & DroneCAN / UAVCAN v0.0 Configuration App – Ver. 2021.1.12.1 |
Download Now |
| Firmware | |
| CAN(2.0A, 2.0B) & DroneCAN / UAVCAN v0.0 App Firmware Update – Ver. 2021.1.12.1 | Download Now |
| CAN Firmware – Ver. 11.4.2 | Download Now |
Hitec CAN Servo Register Header (hitec-can-servo-reg-public.h)
Download Now Integration Guide DroneCAN / CanServo / ParamService / List Download Now ArduPilot Integration & Log Analysis Download Now Configuration Procedure - Node ID, Stream Rates & End Points Download Now Hitec Commercial Solutions - Update Procedure Download Now Configuration App Download the following app to configure your actuator:CAN(2.0A, 2.0B) & DroneCAN / UAVCAN v0.0 Configuration App – Ver. 2021.1.12.1 Download Now Firmware CAN(2.0A, 2.0B) & DroneCAN / UAVCAN v0.0 App Firmware Update – Ver. 2021.1.12.1 Download Now DroneCAN / UAVCAN v0.0 Firmware – Ver. 21.4.2 Download Now
| CAN(2.0A, 2.0B) Command Protocol | Download |
|---|---|
| Wiki | |
|
Command Protocol Support |
More Information |
| Manual | |
|
CAN(2.0A, 2.0B) & DroneCAN / UAVCAN v0.0 Servo Actuator Control Protocol Manual (Updated: 02/14/22) |
More Information |
| Library | |
|
Hitec CAN Servo Register Header (hitec-can-servo-reg-public.h) |
Download Now |
| Configuration App | |
| Download the following app to configure your actuator: CAN(2.0A, 2.0B) & DroneCAN / UAVCAN v0.0 Configuration App – Ver. 2021.1.12.1 |
Download Now |
| Firmware | |
| CAN(2.0A, 2.0B) & DroneCAN / UAVCAN v0.0 App Firmware Update – Ver. 2021.1.12.1 | Download Now |
| CAN Firmware – Ver. 11.4.2 | Download Now |
ELEVATE YOUR AERIAL EXPECTATIONS.
Our skilled staff of FAA Part 107 certified pilots provides end-to-end aerial services for a variety of customers in an array of industries. Using a myriad of drone platforms, we deliver quality aerial data and actionable information designed to change the way you collect, analyze and share intelligence.
LEARN MORE ABOUT OUR DRONE SERVICES